Hammond B-3 Organs ~ Leslie Speakers ~ Parts ~ Trek II Products ~ Motion Sound

Trek II Products - Product Usage Chart

IMPORTANT! Trek II Products Usage Chart and Special Line Voltage Considerations


IMPORTANT! Trek II Products Usage Chart and Special Line Voltage Considerations
Show Larger Picture
IMPORTANT! Trek II Products Usage Chart

Price $0.00


Product Details for IMPORTANT! Trek II Products Usage Chart and Special Line Voltage Considerations

When used outside of the U.S., special care must be given to specify the correct line voltage for all products which require connection to the AC power line. Although many products are available in both 110 Volt and 220/240 Volt versions, this is not the case for every product. In addition, because a product may be installed inside an organ which is connected to an external step-down transformer, the fact that the local line voltage is 220/240 Volt does not automatically determine that the 220/240 Volt version of a product is appropriate. The following information is provided to make selection easier. If further assistance is required, please contact the factory at 732-214-9200.

PRODUCTS AVAILABLE IN 110 VOLT VERSIONS ONLY:

    ERT-1, HRT-1, MRT-1, SC-60D-1, SC-60D-2, URT-1

PRODUCTS AVAILABLE IN BOTH 110 VOLT AND 220/240 VOLT VERSIONS:

    GNR-1A, RV-1C, SB-2500B, SSP-1C, SSP-3A, TP-2B, TR-2-6

  • The 110 Volt version is appropriate for use in organs which were originally manufactured to function on 110 Volts. This includes 110 Volt organs being used in 220/240 Volt areas with an external 220 to 110 Volt step-down transformer.

  • The 220/240 Volt version is appropriate for use in organs which were originally manufactured to function on 220/240 Volts, or have been converted to 220/240 Volts by replacing the internal motors and amplifiers with 220/240 Volt parts.

SPECIAL NOTES REGARDING THE UC-1A:

The UC-1A is available in both 110 Volt and 220/240 Volt versions. However, since the AC power supplied to the UC-1A is passed along to the Leslie 6 and 9 pin connectors, the UC-1A must be ordered with the same voltage rating as the Leslie(s) being used.

EXAMPLES:

  • If you have a 110 Volt Leslie, and 110 Volt line voltage.... use 110 Volt UC-1A. 

  • If you have a 220/240 Volt Leslie, and 220/240 Volt line voltage.... use 220/240 Volt UC-1A.

  • If you have a 110 Volt Leslie, and 220/240 Volt line voltage.... use 110 Volt UC-1A, and plug the UC-1A into an external 220 to 110 Volt step-down transformer.

IMPORTANT NOTE REGARDING 220/240V LESLIES IN THE 147 FAMILY: 220/240V Leslies in the 147 family were manufactured with either a 120V or 240V tremolo control relay. The UC-1A can be made compatible with either type, however the relay voltage of the particular unit MUST be determined first so that the UC-1A can be configured properly. Contact the factory for assistance in determining the requirements of your particular unit.

 




Photos | Testimonials | FAQs | Policies | © 2017 B3 Guys. All Rights Reserved.